22169120 ONLITE local SWITCH MODULE II The ONLITE local Switch Module II is a DALI input device for independent switching of the four emergency lighting circuits of the SB 128 controller from maintained to non-maintained mode. Standard switches or timers with floating contacts can be used for switching the emergency lighting circuits or single luminaires in a circuit. This makes it possible to switch escape sign luminaires and emergency luminaires to non-maintained mode outside of operating times that due to relevant standards and regulations must be normally operated via maintained mode. This enables the service life to be significantly extended and power consumption to be significantly reduced. Supply is via the DALI control line connected at the terminals (no mains connection). Current consumption is max. 4 mA (2 DALI loads). The DALI input can withstand an external voltage of 230/240V. The device is intended for installing in conventional flush-fitting sockets behind the switch. Dimensions: 47.7 x 28.2 x 14.6 mm. Material: halogen-free, flame-retardant polycarbonate. Switches must be designed for at least 15 VDC and are connected to the device leads.