TECTON II MPO continuous row luminaire
TEC2 5k5-840 L15 MPO LDE WH
Article number: 42191988
EAN number: 9010757516281
continuous-row luminaire 33W 5730lm 4,000 K
Luminous flux
5730 lm
Control
Dimming DALI
Dimming DSI
Dimming with push-button
Correlated colour temperature
4000 K
Colour
White
Technical Data
Electrical Properties
EEC
B
Luminaire input power
33 W
Power factor
0.96
Rated voltage
220 - 240 V
Total harmonic distortion (THD)
7.8 percent
Driver
Driver 1: 1 x LC 40/75-400/230 o4a NF h16 EXC4
Safety Class
SC1
Control
Dimming DALI
Dimming DSI
Dimming with push-button
Emergency included
No
Lum Data
Yes
Light Distribution
Light Source
LED
Luminous flux
5730 lm
Luminaire efficacy
174 lm/W
Correlated colour temperature
4000 K
Chromaticity tolerance (initial MacAdam)
3
Colour Rendering Index min.
80
Light Distribution
STD - standard
Physical Characteristics
Dimensions
1522x104x151 mm
Mounting type
Suspended
Surface mounted
Length
1522 mm
Width
104 mm
Height
151 mm
Weight
4 kg
Colour
White
Impact strength
IK06
Degree of protection
IP20
Reflector Color
powder coated
Maintenance and Protection
Rated useful life (B10)
L95 100000 h 35 °C
Maintenance category CIE 97
D - Enclosed IP2X
Norms and Standards
Certificates









Downloads
TECTON II MPO continuous row luminaire
42191988 TEC2 5k5-840 L15 MPO LDE WH
Linear, energy-efficient TECTON II MPO LED continuous-row luminaire with 192 highly efficient mid-power LEDs per segment. , DALI controllable luminaire with LED converter, makes environmental and financial sense. LED service life lasts 100000 h before luminous flux is reduced to 95% of the initial value. Chromaticity tolerance (initial MacAdam): 3. Luminaire efficacy: 174 lm/W. Luminaire luminous flux: 5730 lm. Colour rendering Ra > 80, colour temperature 4000 K. Light guided via backlit multi-layer MPO micropyramidal optic for minimising perceived glare and UGR values. 12% indirect light for soft ceiling illumination. Co-extruded hollow-chamber profile with bonded end caps (shatter-resistant to IK06) achieve IP50 protection for LED and optic. All-in-one solution: Batten luminaire, lamp and reflector are combined in a single product. Dimming level for DC mode preset to 15%. Base support of LED continuous-row luminaire of sheet steel, powder coated in polyester lacquer finish, white. 100% flexible, tool-free mechanical and electrical installation using CLIX-technology by means of two side-mounted rotary levers on the TECTON II trunking. No ultraviolet or infrared radiation. ambient temperature: -20°C to +35°C. Luminaire wired with halogen-free leads, silicone-free. Note: please talk to your adviser if you are planning to use the luminaire in environments containing chemical pollutants. Dimensions: 1522 x 104 x 151 mm. Weight: 4 kg.
